LEGACY PRIMER
LEGACY PRIMER is a polymer based primer especially formulated for exterior surfaces. It is ready to use and does not require any curing by spraying water. It is a combination of good performance and economy and also saves time.
PROPERTIES
LEGACY PRIMER is formulated specially with a water resistant polymer with excellent adhesion. Its unique properties include:
» easy to apply and does not require curing with water like cement paint
» prevents chalking of the surface due to excellent adhesion provided by the polymer
» improves the bonding between the surface and the new paint
» provides a whiter surface that gives a brighter appearance to the new paint
RECOMMENDED USES
LEGACY PRIMER can be used on exterior masonry surfaces that are either newly plastered or which have old paint.
SURFACE PREPARATION
The surface should be first cleaned of dirt, fungi, algae and loose paint. Water jetting and application of a suitable fungicidal solution to completely remove the already present fungi and algae should follow this. The surface must be allowed to dry, then one coat of Legacy Primer should be applied.
APPLICATION
Can be applied by brush, spray or roller. Thinning should be done with clean water. Add 800 – 850 ml of water to 1 litre of the primer for priming new/bare surfaces or previously painted surfaces. A time period of 2-3 hours should be allowed before application of the paint.
COVERING CAPACITY
This will depend upon the method of application and nature of the substrate. LEGACY PRIMER covers 16-19 sq.meters per litre for one coat.
PACKING
LEGACY PRIMER is available in 20 litres and 4 litres packing.